Completed Jobs in MA and RI.
Get a Free EstimateCompleted Jobs by Pioneer Basement
Following jobs are completed by Pioneer Basement. We do not publish customer’s contact information to protect their privacy. If you have any questions regarding any of the jobs or need references, please call us.
We installed a Level 5 iBasement system, which includes a full perimeter drainage system with a full-wall vapor barrier, a dual pump system with a battery backup, and an iBasement advanced pump controller. We also installed a high-efficiency dehumidification system to control the humidity level. With this installation, the customer can now finish their basement with peace of mind, knowing that their investment will be safe!!!
We installed a Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain Drainage system with ThermalShield vapor barrier on the walls. We also removed the wooden bulkhead steps and installed a drain and vapor barrier in the bulkhead area. The entire drain is connected to two GrateSump liners with a single 1/3hp FastSump Pump and a High Water Alarm. The discharge for the pump goes up and out to a IceCop freeze protection device and is buried underground 30 feet from the house.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Level 6 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system. We also installed a Santa Fe high efficiency dehumidifier with some duct work to be able to make the air circulate through all the rooms properly.This installation also includes a 3 year annual maintenance plan and is covered under a nationally backed life of house warranty.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup system.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup system. We also installed a WiseAire 95 dehumidifier to keep the humidity in the basement under control.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed and provided the customer a Level 3 Healthy Crawlspace Certificate.This consisted of a CrawlShield encapsulation system with a Pump Geek Advanced Pump Controller and a FastSummp 1/3hp sump pump system. We also installed a Wiseair Dehumidifer to keep the humidity under control.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system. This system also included a PumpGeek Advanced Pump Controller. This controller monitors the pump system and will alert the customer by email or text if there is a problem.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a sealed full perimeter GrateDrain drainage system and ThermalShield vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a Pump Geek advanced pump controller/alarm. This controller monitors the pump system and will alert the customer by email or text if there is a problem.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system. This system also included a PumpGeek Advanced Pump Controller. This controller monitors the pump system and will alert the customer by email or text if there is a problem.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We Installed a Level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system and a small stip of vapor barrier at the bottom in order to seal the system. If the customer gets any wall leaks in the future we can easily divert the leak into the drainage system by adding a full wall vapor barrier. We installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system. We also installed a Santa Fe high efficiency dehumidifier with some duct work to be able to make the air circulate through all the rooms properly.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a sealed full perimeter GrateDrain drainage system and ThermalShield vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.We also installed a WiseAire 60 high efficiency dehumidifier to keep the humidity in the basement below 50%.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a sealed full perimeter GrateDrain drainage system and ThermalShield vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a Pump Geek advanced pump controller/alarm.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We removed the existing drainage system and installed a partial GrateDrain drainange system with ThermalShield vapor barrier on the walls. We took her existing pumps and installed them into new GrateSump liners with new discharges to the outside.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and ThermalShield vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with 2 PS50 high output pumps and a high water alarm.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup system. We also installed a high efficiency dehumidifier to keep the humidity in the basement lower.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Level 6 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. For the pumping system we installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system. We also installed a High efficiency dehumidifier. A maintenance plan was also included to help keep the system working properly.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and small strip of vapor barrier at the base of the wall. We also installed a dual chambered GrateSump liner with two 1/3hp FastSump pumpas and a high water alarm. We also installed a WiseAire 90 High efficiency dehumidifier.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a dual chambered GrateSump liners with 2 1/3hp FastSump pumps.
We installed a Custom Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with ThermalShield vapor barrier on the wall. We also installed 2 1/3hp pumps and a 12 volt battery backup system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a 2 sets of dual chambered GrateSump liners with 2 1/3hp FastSump pumps and a Battery backup system in each location.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a 2 sets of dual chambered GrateSump liners with 2 1/3hp FastSump pumps and a Battery backup system in each location.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a two 1/3hp FastSump pumps and a high water alarm.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a two 1/3hp FastSump pumps and a high water alarm. The attached crawlspace was tied into the drainage system in the basement so the water from the crawlspace will drain into the basement then get pumped out. We also encapsulated the crawlspace with crawlshield encapsulation system and installed a WiseAire 55 high efficiency dehumidifier.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup system.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup system.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup system.
We installed a Custom Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with ThermalShield vapor barrier on the wall. We also installed 2 1/3hp pumps and a 12 volt battery backup system.
We Installed a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a Two dual chambered GrateSump liners with 4 1/3hp FastSump HP pumps. Customer has a Auto start generator he will be tieng the pumps into.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We installed 2 separate Dual Gratesump liners with 1/2hp high output sump pump systems. We also installed a WiseAire 90 dehumidifier and hung it up on the floor joists to keep it off the ground.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We provided him with custom Level 1 Healthy Basement Certificates. This consisted of a full perimeter GrateDrain drainage system with a small strip of vapor barrier at the base. We also installed a Dual Chambered GrateSump liner with a two 1/3hp pumps.
We installed a Custom Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with ThermalShield vapor barrier on the wall. We also installed 2 1/3hp pumps and a 12 volt battery backup system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a Custom Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with small strip of vapor barrier at the base of the wall. We also installed a FastSump combo pump system. This included 2 1/3hp pumps and a 12 volt battery backup system.
We installed our CrawlShield Encapsulation system to seal off the crawlspace walls and floor. We also installed a WiseAire dehumidification system to keep the humidity down.
We provided her with custom Level 1 Healthy Basement Certificates. This consisted of a full perimeter GrateDrain drainage system with a full wall vapor barrier. We also installed a Dual Chambered GrateSump liner with a single 1/3hp pump.
We provided him with custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with a full wall vapor barrier. We also installed a Dual Chambered GrateSump liner with a single 1/3hp pump and a high water alarm.
"We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We also encapsulated both crawlspaces with CrawlShield crawlspace encapsulation system and installed a high efficiency Wise Aire dehumidifier to keep all three spaces dry."
We provided her with a Level 5 Healthy Basement Certificate. This consisted of a full perimeter Gratedrain drainage system with a half wall ThermalShield vapor barrier. We also installed a Dual Chambered GrateSump liner with a FastSump Combo primary/ battery backup pump system. To keep the humidity in the basement down we installed a WiseAire 90 dehumidification system.
We repointed and skim coated different areas in the basement where the old mortar was crumbling and falling down. After that we Provided him with a Level 5 Healthy Basement Certificate. This consisted of a full perimeter Gratedrain drainage system with a half wall ThermalShield vapor barrier. We also installed a Dual Chambered GrateSump liner with a FastSump Combo primary/ battery backup pump system. To keep the humidity in the basement down we installed a WiseAire 90 dehumidification system.
We provided him with custom Level 1 Healthy Basement Certificates. This consisted of a full perimeter GrateDrain drainage system with a small strip of vapor barrier at the base. We also installed a Dual Chambered GrateSump liner with a single 1/3hp pump in both pump locations.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and vapor barrier on the wall. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We provided her with a Level 5 Healthy Basement Certificate. This consisted of a full perimeter Gratedrain drainage system with a half wall ThermalShield vapor barrier. We also installed a Dual Chambered GrateSump liner with a FastSump Combo primary/ battery backup pump system. To keep the humidity in the basement down we installed a WiseAire 90 dehumidification system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We installed GrateDrain drainage system with a small strip of vapor barrier to seal the system. The new drain was tied into the existing pump system to allow the water to drain to the pump.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We installed a partial GrateDrain drainage system. We also installed a 1 foot strip of vapor barrier at the base of the wall to seal the system and to be able to add a full wall vapor barrier at a later date if needed.
We provided her with a Custom Level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with a strip of vapor barrier on base of the walls in one portion.Then full wall vapor barrier in another portion. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 4 1/3hp FastSump pumps and 2 Battery backup systems.
We installed a Custom Level 1 Healthy Basement Certificate. This consisted of a Full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with dual 1/3hp FastSump pumps and a high water alarm. We also installed a WiseAire 90 high efficiency dehumidifier.
We provided him with a Level 1 Healthy Basement Certificate. This included a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with a one foot strip of vapor barrier on the walls. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We installed a Custom Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with vapor barrier on the wall in the bulkhead area. We also installed a FastSump combo pump system. This included 2 1/3hp pumps and a 12 volt battery backup system.
We installed a Level 2 Healthy Basement Certificate. This consisted of two FastSump combo pump systems. This included 2 FastSump 1/3hp pumps and a 12 volt battery backup system in each pump location.
We installed a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo pump system that included 2 FastSump 1/3hp pumps and a 12 volt battery backup pump system.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 4 1/2hp pumps.
We installed a full perimeter GrateDrain system with a small strip of vapor barrier at the base in order to seal the system and allow a wall vapor barrier to be easily installed later on.
We installed a partial GrateDrain drainage system with Thermalshield wall vapor barrier tied into 2 new GrateSump liners. Customer wanted to utilze his existing pumps so we installed them in the new GrateSump liners.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We added a full perimeter GrateDrain system with ThermalShield Vapor barrier on the walls and tied it into his existing GrateSump pump system.
We installed a GrateWell window well enclosure and a Flex-Shield crack repair.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We installed a Level 6 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo system. This included 2 1/3hp FastSump pumps with a 12volt battery backup system and a high water alarm. To keep the humidity down we installed a WiseAire 90 dehumidifier. There was also a 1 year maintenance plan included with this system.
We removed the existing drainage system that failed and installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We installed a Level 6 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo system. This included 2 1/3hp FastSump pumps with a 12volt battery backup system and a high water alarm. To keep the humidity down we installed a WiseAire 90 dehumidifier. There was also a 3 year maintenance plan included with this system.
We provided him with a Custom Level 1 Healthy Basement Certificate. This consisted of a Partial GrateDrain drainage system with a strip of vapor barrier on base of the walls. We also installed a dual chambered GrateSump liner with a single 1/3hp FastSump pump and a high water alarm.
We installed a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup with a high water alarm.
We also installed a WiseAire 90 dehumidifier to keep the humidity in the basement under control.
We provided him with a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We installed a Custom Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with ThermalShield vapor barrier on the wall. We also installed a FastSump combo pump system. This included 2 FastSump 1/3hp pumps and a 12 volt battery backup system.
We installed a Level 6 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo system. This included 2 1/3hp FastSump pumps with a 12volt battery backup system and a high water alarm. To keep the humidity down we installed a WiseAire 90 dehumidifier. There was also a 3 year maintenance plan included with this system.
We installed a custom level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with a full wall ThermalShield vapor barrier. We also installed a dual GrateSump liner with a single 1/3hp FastSump pump.
We installed a Level 1 Healthy Basement Certificate. This consisted of a dual GrateSump liner with two 1/3hp FastSump pumps and a high water alarm.
We provided him with a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system.
We provided him with a Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system. We also install a dual chambered GrateSump liner with a FastSump Combo primary/battery backup pump system.
We provided him with a Level 5 Healthy Basement Certificate. This consisted of a full perimeter Gratedrain drainage system with a half wall ThermalShield vapor barrier. We also installed a Dual Chambered GrateSump liner with a FastSump Combo primary/ battery backup pump system. To keep the humidity in the basement down we installed a WiseAire 90 dehumidification system.
We provided him with a Level 1 Healthy Basement Certificate. This consisted of a Partial GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a dual chambered GrateSump liner with a 1/3hp FastSump pump and a high water alarm.
We provided him with a Level 1 Healthy Basement Certificate. This consisted of a 1/3hp primary pump and a full perimeter GrateDrain drainage system.
We provided him with a level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with ThermalShield wall vapor barrier. We also installed a dual Gratesump liner with a single 1/3hp FastSump pump and a discharge to the exterior.
We provided him with a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with a small strip of vapor barrier at the base of the wall. We also installed a FastSump combo dual 1/3hp pump system and a battery backup.
We installed a custom level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with a small strip of vapor barrier at the base of the wall. We also installed two high output 1/2hp pumps and split the discharges in two directions to maximize water flow. In front of the doorway we installed a surface drain to catch any water that might come through the door during a heavy rain storm.
We encapsulated the crawlspace with CrawlShield and DimpleShield liners. We also installed a WiseAire 55 dehumidifier to help keep the humidity in the crawlspace below 50%.
We installed a level 2 Healthy Basement Certificate. This consisted of Two GrateSump liners and two 1/3hp pumps and a battery backup system.
We installed 4 Crackshield crack repairs and a FastSump combo. This consisted of two 1/3hp FastSump pumps and a Fs600 battery backup.
We installed a Level 6 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls and two high output 1/3hp pumps with a battery backup system. We also installed a high efficiency WiseAire dehumidifier.
We installed a level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed teo 1/3hp FastSump pumps with a battery backup system just in case of a power outage.
We installed a level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain system with ThermalShield wall vapor barrier and a single 1/3hp primary Fast Sump Pump.
We installed a Level 1 Healthy Basement Certificate. This consisted of a Full Perimeter GrateDrain system with ThermalShield wall vapor barrier and a single primary 1/3hp Fast sump pump system.
We provided her with a WiseAire 90 dehumidifier with and duct kit so the unit can stay in the unfinished portion of the basement and also be able to dry the finished space.
We provided him with a level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with full wall ThermalShield vapor barrier. We also installed a FastSump Combo primary/backup pump system. This system is covered by a nationally backed life of house warranty.
We provided him with a Level 4 Healthy Basement certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo Primary/Backup double pump system.
We provided her with a Level 2 Healthy Basement Certificate. This consisted of a FastSump combo primary / backup pump system.
We installed a level 4 Healthy basement certificate. This consists of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo primary /Backup double pump system. The level 4 drainage system is covered by a fully transferable nationally backed life of house warranty.
We provided her with a Custom level 1 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and a single Fastsump 1/3hp primary sump pump.
We provided him with a level 1 Healthy Basement Certificate. This consisted of a primary 1/3hp pump and a partial GrateDrain system with ThermalShield vapor barrier along the one wall he was having leaks on. We went with this method because there was multiple cracks on the same wall and its better to treat them with a drain and vapor barrier then to seal each individual crack up. This job is covered by a life of house warranty along the areas where we installed the drains.
We provided him with a New complete bulkhead with stairs. We also installed a level 5 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also install a FastSump Combo primary/battery backup double pump system. The pump discharge was brought out of the house and buried 15 feet away from the foundation.
We installed a GrateSump pump system with a 1/3hp FastSump pump inside. We also installed GrateDrain leading from where the old floor drain was and attached it to the GrateSump system. We then installed a GrateTrench floor drain. This system will allow water to flow down into the floor but not allow anything to come back up. If the water backs up in the underground drain it will flow through our GrateDrain and into the GrateSump system. Now the drain will function like it has been but if there is a backup of water then the pump system will take over automatically.
We provided the customer with a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo double pump/battery backup system. This installation comes with a Nationally Backed Life of House Warranty!
We provided the customer with a Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system and ThermalShield vapor barrier. It also included a dual GrateSump liner with a single FastSump 1/3hp pump. We also extended her downspouts away from the house.
We provided him with a Level 4 Healthy basement Certificate. This consisted of a Full Perimeter GrateDrain system with Thermal Shield Vapor Barrier on the walls. We also installed a Fast Sump Combo dual pump system with a battery backup pump.
We installed a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a double 1/3 hp pump system with separate discharges to the outside and terminated the discharges about 50 feet from the house.
We provided him with a level 4 Healthy Basement Caertuficate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo double pump system.
We provided him with a level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed 2 high output 1/2hp pumps with separate discharges to the exterior. Customer will be installing a auto start generator because his area can lose power for weeks on end.
We provided her with a Level 2 Healthy Basement Certificate.
This consisted of a FastSump Combo double pump system with a battery backup.
We provided him with a level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system and a Fastsump combo double pump system.
We provided her with a Level 5 Healthy Basement Certificate. This included a full perimeter GrateDrain drainage system with a ThermalShield Vapor Barrier on the walls. It also included a FastSump combo primary/backup pump system. This system is covered by a nationally backed life of house warranty.
We provided her with a Level 5 Healthy Basement Certificate. This included a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a GrateSump Combo XL which included 2 high output 1/3hp pumps and a fs1200 battery backup system. Finally we installed a WiseAire 90 high efficiency dehumidifier. This system is covered with a Life of House Nationally Backed warranty.
We provided her with a level 4 Healthy Basement Certificate. It included a full perimeter GrateDrain drainage system with a GrateSump combo pump system. This consisted of 2 FastSump 1/3hp pumps and a battery backup pack.
We provided him with a Level 6 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also installed a FastSump combo primary/backup pump system. A Santa Fe dehumidifier was also added to keep the humidity in the basement under control.
We provided her with custom level 1 Healthy Basement Certificate. This consisted of a Full Perimeter GrateDrain drainage system with ThermalShield Vapor Barrier on the walls. We also installed a Dual GrateSump liner with a FastSump 1/3hp pump and a High water Alarm. The pump discharge was routed outside and buried underground leading away from the house.
We provided her with a level 3 Healthy Crawlspace Certificate. This consisted of us ripping all the rigid foam insulation of the walls. We then installed a GrateSump 1/3hp primary pump system. We also encapsulated the crawlspace with DimpleShield drainage matting with the CrawlShield crawlspace liner on top. This will seal back any moisture coming up from the floor and drain any water that enters the space over to the pump system. Once the job was complete we installed a Santa Fe Advance crawlspace dehumidifier in order to keep the humidity in the crawlspace under control.
We provided him with a Level 3 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with a 1 foot vapor barrier strip. This allows us to seal the system and be able to tie back into the drains if the customer ever has a wall leak. We also installed a FastSump Combo Primary/ Battery backup pump system.
We provided him with a full perimeter GrateDrain drainage system with ThermalShield vapor barrier on the walls. We also install a dual FastSump primary pump system.
We provided him with a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with full wall ThermalShield vapor barrier. We also installed a FS900 Combo primary/backup double pump system.
We provided him with a level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain with FinishShield vapor barrier on the walls. It also included a FS900 Combo Primary/Backup double pump system.
We provided him with a Level 2 Healthy Basement Certificate. This consisted of a FS900 Combo primary/backup 1/3hp double pump system.
We upgraded his pumping system to a Level 1 Healthy Basement Certificate. This included 2 GrateSump pump liners with a single 1/3hp FastSump pump system.
We installed a partial GrateDrain drainage system with a ThermalShield vapor barrier on the wall. We also installed a FS1200 Combo 1/3hp primary/backup double pump system.
We provided him with a level 4 Healthy basement Certificate. This consisted of a full perimeter GrateDrain drainage system with a full wall ThermalShield vapor barrier. We also installed a FastSump Combo 1/3hp Primary/Backup double pump system.
We provided the customer with a Level 4 Healthy Basement Certificate. This included a full perimeter GrateDrain drainage system with a full wall ThermalShield vapor barrier. We also install a Fastsump 1/3hp combo-primary/backup double pump system.
We installed a full perimeter GrateDrain drainage system with FinishShield vapor barrier on the walls. We also added a second backup pump system.
We installed a full perimeter GrateDrain drainage system with ThermalShield Vapor barrier on the walls. We also installed Dual GrateSump Liners and a new 1/3hp FastSump pump.
We encapsulated the crawlspace with our CrawlShield liner. We also installed a FastSump plus primary/battery backup pump with Santa Fe Advanced 2 dehumidifier to keep the space dry.
We provided her with a 50 foot GrateDrain and ThermalShield vapor barrier extension.
We provided him with a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GreatDrain drainage system with full wall ThermalShield vapor barrier. It also included a FastSump Combo primary/battery backup double pump system.
We provided him with a partial GrateDrain system with vapor barrier on the walls that extended into his bulkhead. We also installed a 4foot GrateTrench surface drain in front of the bulkhead doorway and a new GrateSump 1/3hp pump system.
We extended her existing GrateDrain system along two walls and also added FinishShield vapor barrier to the walls.
We provided him with a Partial GrateDrain system with ThermalShield vapor barrier on the walls. We also installed a single GrateSump liner with a 1/3hp high efficiency pump.
We provided her with a Level 1 Healthy Basement Certificate. This consisted of a partial GrateDrain system with ThermalShield vapor barrier on the walls and a 4 foot GrateTrench surface drain in front of the bulkhead doorway. It also included 2 GrateSump pump liners with 1 primary 1/3hp pump and a High Water Alarm.
We Provided her with a Level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainge system with FinishShield Vapor Barrier on the walls and a 4 foot GrateTrench surface drain in front of the bulkhead door. It also included 2 GrateSump pump liners with a high efficiency 1/3HP pump and a FS1200 Battery Backup Pack for power outages.
We provided him with a level 2 Healthy Basement Certificate. This consisted of a partial GrateDrain drainage system with ThermalShield vapor barrier. We also installed a Fastsump Combo primary/backup pump system.
We provided him with a Partial GrateDrain drainage system with FinishShield Vapor Barrier on the walls. We also installed a GrateSump 1/3hp Pump system.
We provided her with a level 2 Healthy Basement Certificate. This consisted of 2 FastSump 1/3hp primary pumps and one FS900 battery backup pack. We piped both pumps independently to the outside.
We provided her with a level 5 Healthy Basement Certificate. This included a full perimeter GrateDrain drainage system with full wall FinishShield vapor barrier. This also included two FastSump Combo Primary/Battery Backup pump systems. We also installed a Santa Fe Dehumidifier to keep the humidity at a safe level.
We provided her with a level 4 Healthy Basement Certificate. This included a full perimeter GrateDrain system with Finish Shield vapor barrier on all walls. It also included a Fastsump combo primry/backup pump system.
We provided him with a partial GrateDrain drainage system. The walls were treated with ThermalShield Vapor barrier. We also installed a Fastsump Combo primary/backup pump system.
We provided him with a FastSump Combo pump system. We also installed a surface grate in front of the bulkhead doorway. This will catch the water and direct it towards the pump.
We provided her with a Level 4 Healthy Basement Certificate. It included a full perimeter GrateDrain drainage system with full wall vapor barrier. It also included a FastSump Combo- primary/ Backup pump system.
We provided her with a GrateSump 1/3hp pump system and a surface GrateTrench drain in front of the bulkhead doorway. This will catch the water and direct it to the pump. The pump wil lthen eject it outside into a underground 20 foot discharge line that will lead the water away from the house.
We provided her with a Level 4 Healthy Basement Certificate. This included a full perimeter drainage system with full wall vapor barrier. It also included a GrateSump Combo primary/backup pump system.
We leveled off the floor. Then we brought in 4 inched of crushed stone. We installed a new GrateSump combo double pump system that included a battery backup pump system. We then covered the stone with a dimpled membrane and then poured a new cement floor over it. While leveling off the floor we installed a reinforced concrete footing in order for the new steel support column to be installed.
First we injection sealed the crack in the wall then we installed a partial GrateDrain system and FinishShield vapor barrier. We also installed a GrateSump pump system with a FastSump 1/3hp primary pump. We ran the discharge for the pump up and out the side of the house and into a 40 foot underground pvc line.
We provided her with a full perimeter GrateDrain system that included a full wall ThermalShield vapor barrier. We also installed a dual GrateSump pump system and discharged it out the rear of the property into a underground line that extends away from the house.
We provided her with a full perimeter GrateDrain system that included a full wall ThermalShield vapor barrier. We also installed a dual GrateSump pump system and discharged it out the rear of the property into a underground line that extends away from the house.
We provided her with a full perimeter GrateDrain system with a double pump GrateSump system. We covered the walls with FinishShield Vapor Barrier and poured a new concrete slab.
We provided him with a Crawl Shield encapsulation system. We drain the crawlspace into the drainage system that was already in the basement. We also installed a Santa Fe dehumidifier in the basement and ducted it into the crawlspace in order for it to dehumidify both spaces effeicienlty
We prvided her with a GrateSump pump system. We also installed a partial GrateDrain system with full wall FinishShield vapor barrier on the back wall of the house.
We provided him with a FastSump Combo 1/2hp primary and backup pump system. We installed FinishShield vapor barrier on all the walls in order to drain any wall leaks that might occur. Prior to laying down the new concrete slab we installed 3-4 inches of crushed stone and covered it with DimpleShield drainage matting.
We provided the customer with a GrateSump pump system and a GrateTrench surface drain to catch the water that is coming in and direct it to the pump system.
We provided her with a GrateSump pump system and a 4 foot GrateTrench drain in front of her bulkhead doorway.
We provided him with a full perimeter drainage system that tied into the the GrateSump pump system he already had installed by us. We also installed a full wall FinishShield vapor barrier in order to drain the foundation walls and seal the drainage system.
We provided him with a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain system with full wall FinishShield HD vapor barrier and a FastSump Combo primary/battery backup pumping system.
We provided her with a 1/3hp GrateSump pump system and a GrateTrench surface drain in front of bulkhead doorway.
We provided the customer with a partial GrateDrain dranage system with full wall ThermalShield vapor barrier and a GrateSump pumping system.
We provided the customer with a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain drainage system with full wall ThermalShield vapor barrier and a FastSump Combo primary/batterybackup pumping system.
We provided her with a partial GrateDrain drainage system with full wall FinishShield Hd vapor barrier and a new GrateSump sump pump system.
We provided her with a 1/3hp Gratesump sump pump system. We also installed a partial GrateDrain system with FinishShield HD vapor barrier over the crack in her foundation. This will allow water to drain down into the new pumping system and then get ejected outside.
We provided her with a new GrateSump pump system. We also installed a partial GrateDrain system with ThermalShield vapor barrier on the walls where the drains were being installed.
We broke out the slab in the bulkhead. We then lined the walls with a DimpleShield membrane and HD FinishShield vapor barrier over it. Those two layers were tied into a new GrateSump pump system that will eject the water outside. The bulkhead floor was reconcreted after and the area is now protected against any leaks that might come in.
We provided the customer with a CrawlShield encapsulation system, Grate sump pump system, and a Santa Fe advanced 2 dehumidifer.
We provided them with a FastSump plus system. This system can automatically switch back and forth between A/C and D/C power.
We removed his existing pump system and installed a new GrateSump system with a 1/3hp primary sump pump.
We provided the customer with a partial Gratedrain drainage system with a 1foot strip of vapor barrier on the base in order to make sure the system was sealed. We ran the drain into a new GrateSump system with a 1/3hp FastSump pump.
Work area was very small so it took some time to get the floor prepped and the hole dug for the pump system we installed.
We provided them with a CrawlShield encapsulation system along with a Santa Fe advance dehumidifer.
We installed a 1/3hp FastSump pump system and a partial GrateDrain drainage system with 2 Grate trench surface drains so the water that might come in under the door will be caught and sent over to the new sump pump we installed.
We provided him with a partial GrateDrain system that connected to his existing system we did several years prior.
We provided the customer with a full perimeter GrateDrain system with a full wall Finish Shield vapor barrier. Becuase of the size and volume of water they get we had to install 3 different pump locations. 2 out of the 3 locations had 1 1/3 hp pump inside and the third location has 2 1/2hp pumps inside. We also installed a outside surface drain in front of the doors that lead into the basement in order to catch any surface water coming into the doorway.
We provided the customer with a Level 1 Healthy Basemenent Certificate. This consisted of a full perimeter GrateDrain system with full wall ThermalShield vapor barrier and a FastSump combo pumping system. It has 1 primary a/c 1/3hp pump and a 1/3hp 12volt battery backup pump system. This will ensure they stay dry even when the power goes out. This installation is also backed by a national life of house warranty.
We provided them with a FlexShield crack repair. This repair seals the crack and has a second layer that will drain the crack below the basement floor if the first layer ever leaks. It stays flexible so it will move with the foundation during seasonal changes.
We provided her with a GrateDrain drainage system with a full wall FinishShield vapor barrier and a 1/3hp FastSump pumping system.
We installed a full perimeter GrateDrain system with full wall FinishShield Vapor Barrier. We also installed a FastSump Combo pump system so she is protected from power loss and mechanical pump failure. The pump discharges were run outside and burried about 35 feet away from the property to avoid any water recirculation.
We provided a Full perimeter GrateDrain system with a Dual 1/3hp FastSump Combo Pump System. She is now protected from machanical failure and if she loses power.
We installed a full perimeter GrateDrain System with full wall FinishShield vapor barrier. We also installed a single 1/3hp FastSump pump system to pump the water out that the drainage system collects.
We provided her with a full perimeter GrateDrain system and a Dual 1/3hp FastSump pump system to pump the water out that the drainage system collects.
We provided the customer a 1/3hp FastSump pump with a partial GrateDrain system along the one wall she was having the problem on. We also installed a surface GrateTrench in front of the bulkhead door in order to catch any leaks that might come in from that doorway.
We provided a Crawlshield encapsulation system with a new 1/3hp Fastsump Pumping system along with a 12volt battery backup pump. We also installed a Santa Fe classic Dehumidifer to keep the humiduty down in the space.
We provided her with a full perimeter GrateDrain system with a 2 pump FastSump Combo system which included a primary pump and battery backup pump system. We also installed a SantaFe classic dehumidification system to keep the moisture down to a safe level.
We provided a full perimeter GrateDrain system with Full wall FinishShield vapor barrier in order to seal the system and drain any wall leaks that might occur. We also installed a 1/3 Hp primary FastSump pump in order to pump the water out that the drainage system collects.
We provided the customer with a full perimeter GrateDrain drainage system with full wall FinishShield vapor barrier and a FastSump Combo Dual Primary/Backup Pumping system. This will ensure the customer stays dry and can finish the basement with confidence!
We Installed a Level 4 Healthy Basement Certificate. This consisted of a full perimeter GrateDrain (french drain ) drainage system with ThermalShield vapor barrier on the walls. We installed a dual chambered GrateSump liner with 2 1/3hp FastSump pumps and a Battery backup system. We also installed a Santa Fe high efficiency dehumidifier with some duct work to be able to make the air circulate through all the rooms properly.
We installed a radon mitigation system which brought the radon level down to 1.3 pCi/l.